Manufacture	GE
Item No	DS200RTBAG3AHC
Article number	DS200RTBAG3AHC
Series	Mark V
Origin	United States（US）
Dimension	160*160*120(mm)
Weight	0.8 kg
Customs Tariff Number	85389091
Type	Relay Terminal Board

 GE DS200RTBAG3AHC Relay Terminal Board Product Features: GE Power Exciter Board DS20RTBAG3AHC is an optional board installed in the drive cabinet, it has ten relays that can be driven directly by the pilot relay or remotely by the user. The DS200RTBAG3AHC board has 52 wiring points. The endpoints are used for V/O purposes. For example, one series of wiring points is used for the C contact of the relay K20 form. One endpoint is used for the normally open position, one wiring point is used for the common, and one wiring point is used for the normally closed position. DS200RTBAG3AHC also has two piercing connectors. The connectors are CPH and CPN, which provide pluggable circuit control power. CPH is the positive power connector and CPN is the negative power connector. The pluggable circuits that provide power are C1PL to C5PL and Y9PL to Y37PL pluggable circuits, for example, one connector provides positive pluggable circuit control power and the other is a thousand negative pluggable circuit control power. The DS200RTBAG3AHC board is high energy and presents a safety risk if touched while power is connected to the board. Touching any other component in the drive is also a risk and you must follow the steps to disconnect all power to the drive and the main board. First, stop the motor using the control panel and shut down the drive in an orderly manner using standard procedures. To disconnect all power to the drive, find a power source that provides three-phase current and pull out the fuse.Terminal blocks are dedicated to specific I/O purposes, such as the different series of relay K20 Form C contacts. Within this series, individual terminal blocks are available for normally open positions, common connections, and normally closed positions, providing a detailed and customizable framework for relay control. In addition to the wide range of terminal configurations, the board also contains two plug connectors, namely CPH and CPN. These connectors play a vital role in providing control power to pluggable circuits. CPH serves as the positive power connector, while CPN serves as the negative power connector. The pluggable circuits receiving power are represented by connectors C1PL to C5PL and Y9PL to Y37PL. Relays designated K20 to K26 and K27 to K29 play a vital role in the system, and each relay is identified by a specific part number - 68A9663PAC115X for K20 to K26 and 336A5101PAC115 for K27 to K29. The former is equipped with a 115 V AC coil and has a double-pole double-throw (DPDT) contact configuration capable of handling a high current of 10 A. On the other hand, the latter, also equipped with a 115 V AC coil, has a four-pole double-throw (4PDT) configuration that provides the accuracy of 1 A contacts. Frequently asked questions about the product are as follows: -What is the DS200RTBAG3AHC? The DS200RTBAG3AHC is a relay terminal card developed by GE. It is part of the EX2000 excitation system. The GE Power excitation board is an optional component designed to be installed in a drive cabinet and has ten relays that can be activated directly from the pilot relay or by the user through remote control. The board has a total of 52 terminal points and acts as a multi-function hub for input/output (I/O) functions. -How many relays does the DS200RTBAG3AHC have? The DS200RTBAG3AHC has 10 relays K20-K29 that can be driven directly from the pilot relay on the LAN IO terminal board or by the user remotely. -Which board group does the DS200RTBAG3AHC belong to? The DS200RTBAG3AHC is a G3 board group, marked with G3 in the DS3RTBAG200AHC model number. The line voltage for the G3 RTBA is 115 VAC, and for relay K200-K3 on the DS2ORTBAG26AHC, the DS200RTBAG3AHC has a 115 VAC coil and 10 A DPDT contacts. For relay K200-K3 on the DS27RTBAG29AHC, the DS200RTBAG3AHC has a 115 VAC coil and 1 A 4PDT contacts. -What types of hardware jumpers are on the board? The board is equipped with Berg-type hardware jumpers, which are manually removable components that are essential to configure the board to meet specific application requirements.