Manufacture	GE
Item No	DS200TCDAH1BGD
Article number	DS200TCDAH1BGD
Series	Mark V
Origin	United States（US）
Dimension	85*11*110(mm)
Weight	1.1 kg
Customs Tariff Number	85389091
Type	Digital input/output board

GE General Electric Mark V DS200TCDAH1BGD GE Digital input/output board Hardware configuration of DS200TCDAH1BGD can be done through J1 to J8; however, J4 through J6 should be left factory set as they are used for IONET addressing. J7 and J8 are used to enable off-hook timer and test enable respectively. The Speedtronic Mark V gas turbine control system is one of the most proven products of the Speedtronic range. The Mark V system is designed to meet all gas turbine control requirements. The part Numbers of the Mark V control panel and the control board belong to the DS200 series. The Mark V turbine control system USES a digital microprocessor to control the gas turbine. The Mark V Speedtronic control system has a software implemented fault tolerance to improve the reliability of the turbine control system. The central elements of the Mark V control system are communication, protection, distribution, QD digital I/O control processor and C digital I/O. DS200TCDA - Digital IO Board The Digital IO Board (TCDA) is located in the Digital I/O Core <Q11>, <051>, and <021>, if present. The TCDA processes the digital contact input signals from the DTBA and DTBB terminal boards and the contact output (relax/solenoid) signals from the two TCRA boards. These signals are transmitted via I0NET to the TCQC boards in <R1>, <R2>, and if <Q21> is installed, to the CTBA terminal board in <R5>.TCDA Configuration Hardware. There are eight hardware jumpers on the TCDO board. J1 and J8 are used for factory testing. J2 and J3 are for IONET termination resistors. J4, J5, and J6 are used to set the IONETID of the board. J7 is the Pause Timer Enable. Information about the hardware jumper settings for this board.