Manufacture	ABB
Item No	DO802
Article number	3BSE022364R1
Series	800XA Control Systems
Origin	Sweden
Dimension	51*152*102(mm)
Weight	0.3kg
Customs Tariff Number	85389091
Type	Digital Outputt Module

 ABB DO802 3BSE022364R1 Digital Output Module The DO802 is an 8 channel 110 V d.c./250 V a.c. relay (NO) output module for the S800 I/O. The maximum voltage range is 250 V and the maximum continuous output current is 2 A. All outputs are individually isolated.Each output channel consists of optical isolation barrier, output state indication LED, relay driver, relay and EMC protection components.The relay supply voltage supervision, derived from the 24 Vdistributed on the ModuleBus, gives a channel signal error and amodule warning signal if the voltage disappears. The error signal and warning signal can be read through the ModuleBus. This supervision can be enabled/disabled with a parameter.Detailed data: Isolation Individual isolation between channels and circuit common Maximum field cable length 600 meters (600 yards) Rated insulation voltage 250 V Dielectric test voltage 2000 V AC Power consumption Typical 2.2 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus 80 mA Current consumption +24 V external 0 Supported wire diameters Solid wire: 0.05-2.5 mm², 30-12 AWG Stranded wire: 0.05-1.5 mm², 30-12 AWG Recommended torque: 0.5-0.6 Nm Strip length 6-7.5 mm, 0.24-0.30 inchesFrequently asked questions about the product are as follows: -What is the ABB DO802? The ABB DO802 module is used to provide digital output signals from a control system to external devices. It acts as an interface between the control system and field devices, which are activated by digital on/off signals. -What are the input and output specifications of the DO802? The ABB DO802 is a digital output module, typically with 8 digital outputs per module. Dry contacts (no voltage) or wet contacts (voltage present) can be switched. Digital outputs may operate at different voltage levels depending on the specific configuration.Each output channel can typically handle up to 2A of current -Can the DO802 module be used with AC or DC voltages? The DO802 module can support both AC and DC voltages, depending on the configuration and the type of output used.