Manufacture	ABB
Item No	AO801
Article number	3BSE020514R1
Series	800XA Control Systems
Origin	Sweden
Dimension	86.1*58.5*110(mm)
Weight	0.24kg
Customs Tariff Number	85389091
Type	Analog Output Module

 ABB AO801 3BSE020514R1 Analog Output Module The AO801 Analog Output Module has 8 unipolar analog output channels. The module performs selfdiagnostic cyclically. A low internal power supply sets the module in INIT state (no signal from the module). AO801 has 8 unipolar analog output channels, which can provide analog voltage signals to multiple devices at the same time. The module has a resolution of 12 bits, which can provide high-precision analog output and ensure the accuracy and stability of the output signal.Detailed data: Resolution 12 bits Isolation Group-by-group isolation from ground Under/over range - / +15% Output load 850 Ω max Error 0.1 % Temperature drift 30 ppm/°C typical, 50 ppm/°C max Rise time 10 µs Update period 1 ms Current limit Short-circuit protected current-limited output Maximum field cable length 600 m (656 yds) Rated insulation voltage 50 V Dielectric test voltage 500 V AC Power consumption 3.8 W Current consumption +5 V Modulebus 70 mA Current consumption +24 V Modulebus - Current consumption +24 V external 200 mA Supported wire sizes Solid wire: 0.05-2.5 mm², 30-12 AWG Stranded wire: 0.05-1.5 mm², 30-12 AWG Recommended torque: 0.5-0.6 Nm Strip length 6-7.5mm, 0.24-0.30 inchesFrequently asked questions about the product are as follows: -What is ABB AO801? ABB AO801 is an analog output module in ABB AC800M and AC500 PLC systems, used to output voltage or current signals to control field devices in process control systems. -What types of analog signals does AO801 support Supports voltage output 0-10 and current output 4-20m, which is the standard for controlling field devices such as valves, motors and actuators. -How to configure AO801? AO801 is configured using ABB's Automation Builder or Control Builder software. These tools allow setting output range, scaling and I/O mapping, as well as configuring the module to meet specific application requirements.